Corian® care: what non-porous actually means
A practical fact sheet for haldi, ghee, scratches and heat.

What to know in 30 seconds
- Non-porous does not mean stain-proof or heat-proof.
- Wipe spills promptly and follow the finish-specific care guide.
- Ask a fabricator about repair rather than sanding blindly.
The story
Corian® Solid Surface combines acrylic resin and mineral filler. Its non-porous surface is useful around daily puja spills, but good care still matters.
Remove ghee and haldi promptly using cleaning methods recommended by the manufacturer. Rinse and dry the surface; cleaning products and abrasives should match the finish.
Protect the platform from hot diya bases and open flames. Avoid harsh chemicals and do not assume that a material’s resistance makes it immune to damage.
Small marks may be repairable, but the correct method depends on the finish and damage. Have a qualified fabricator assess deeper scratches or heat marks.
Spill & care reference
| Situation | First response |
|---|---|
| Ghee or oil | Clean promptly using recommended detergent |
| Haldi mark | Follow the manufacturer’s stain guidance |
| Hot diya | Use a suitable heat-resistant support |
| Deep scratch | Ask a qualified fabricator |
Follow the manufacturer’s current instructions for your exact colour and finish.
Sources & further reading
Manufacturer and historical references are identified below. Studio design advice and prices are our own guidance.
- DuPont · What is Corian®? (PDF) (opens in a new tab)
Material composition, properties and introduction in 1967.
- Corian® Design · Care & maintenance (opens in a new tab)
Manufacturer guidance on cleaning and protection from direct heat.
- The Mandir Studio · Care guide
Studio guidance; project specifications must be confirmed in writing.


